Guangshengde 15-meter independent workbench belt assembly line drive configuration

1. 2HP Shuangjianglong brand motor, gearbox: Qingfeng brand 80 tooth box; the head and tail are made of square steel, stable, and the motor and motor are not easy to loosen;

2. Speed: 0-6m/min, 2HP frequency converter speed regulation, using frequency conversion speed regulation, safe and low noise;

3. The driving roller is 6 inches * 400, and the driven roller is 3 inches * 400.

Guangshengde independent workbench belt assembly line fuselage structure configuration

1. The support is made of 40*40 iron square pass, working surface height: 720±20mm;

2. Standard screw connection, multiple disassembly damage. Easy disassembly and assembly, stable and not deformed;

3. The pull-throughs on both sides of the middle guide rail of the line body are made of aluminum alloy material, assembled from 40*60 aluminum square passes, which are not easy to pollute electronic products;

4. Green Dutch production δ2*400PVC transport belt, seamed and connected, the workbench is made of anti-static rubber, Guangshengde brand can be printed within 2 years;

5. The bottom of the conveyor belt is supported by a galvanized pallet, and each meter has a φ25*400 galvanized pallet to support it, which is not deformed and ensures stable transportation;

6. The assembling power system adopts galvanized wire trough, 2.5mm2 power cord, and installs multi-hole square sockets per station, 1 per 1 meter;

7. Specifications of the vertical worktable: the tabletop is 600mm*400mm, the tabletop is made of δ16mm wood board, the surface is pasted with green anti-static rubber, and the semi-circular wood is wrapped; the brackets are all made of 30*30 iron square, the working surface is 720±20mm;

8. The specification of the craft guide bookshelf is 300/220mm, and each station is equipped with A4 craft card sets;

9. Install special aluminum profiles for electric batches on both sides of the lamp frame, and one electric batching trolley for each station;

10. The width of the instrument panel is 400mm, the table top is made of δ16mm wood board, the surface is pasted with white fireproof board, semi-circular wood edging, and the bracket is made of 40*40 iron square pass.

Guangshengde independent workbench belt assembly line lighting design

28W/T5 energy-saving lamp with cover, each lamp comes with a small control switch. Use a photometer to test the brightness of 369 Lux in the same environment. The two sides are filled continuously, and the lamp pass material is 25*50 iron flat pass.

Example: A 20-meter belt line (compared to fluorescent lamps), 36 lamps should be installed on both sides, calculated according to the annual power consumption of the 22-day, 8-hour work system (36 lamps * 28 watts * 8 hours * 22 days * 12 Month = 2129 kilowatts) energy saving, power saving, can save 456 kWh, an average of 25.3 kWh per lamp per year.