The automated production line is a highly automated production equipment, so before the automated production line is used, one of the tasks that must be done is to commission the automated production line to avoid damage to the equipment or cause mass production failures. The Guangshengde production line will share with you what to prepare for the trial production of the automated production line.

1. Before starting the trial production of the automated production line machines, you must be familiar with the product process specifications and relevant operating instructions.

2. Before the automated production line is started up, the final assembly work must be further inspected to see if it meets the requirements for trial production. For example, the integrity of the assembly work, the accuracy and reliability of the connecting parts, etc. Start up again under the conditions of ensuring accuracy and safety.

3. Before the automatic production line is started up, the work site must be cleaned up, and all excess materials, workpieces, tools, equipment, etc. must be removed, and the space required for the trial production of the equipment has sufficient size to ensure the trial production of the product The safe and smooth progress. In a site dedicated to mass production, the management regulations of the work area shall be observed.

4. Must be familiar with the use of various testing instruments on the automated production line. The monitoring instruments and meters needed during work should be in good condition. Important test instruments should be used after accuracy check.

5. Before starting the automatic production line machine, you must first turn the transmission parts by hand to confirm that the operation is flexible. The handles of each operation are flexible, accurate in positioning, safe and reliable.

6. According to the lubrication system diagram and lubrication regulations of the automated production line, check that the lubrication system should be operating normally, clean and unobstructed, so as to avoid dry friction during work and cause seizure of parts.